TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 423 of 1008

REPLACE REAR MAIN WIRING HARNESS (M113A2, M901A1, AND

M1059 ONLY ) — Continued

20. Install rear main wiring harness (1) on seven cradles (2). Secure with seven cradle clips (3).

21. If engine coolant heater is installed, connect circuit 402A lead (4) to engine coolant heater wiring harness and circuit

400A lead (5) to engine coolant heater control box.

22. If personnel heater is installed, connect circuit 402 lead (6) to personnel heater wiring harness and circuit 400 lead (7)

to personnel heater control box.

23. Connect circuit 38 lead (8) to front dome light (9).

24. Install wiring harness (1) on weldnut (10). Secure with screw (11) and clamp (12).

25. Install wiring harness (1) on two cradles (13). Secure with two cradle clips (14).

26. Install circuit 28 lead (15) in clamp (16). Secure with screw (17).

27. Connect circuit 28 lead (15) to fuel quantity sending unit (18).

0289 00-15

0289 00

TM 9-2350-261-20-2