TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 430 of 1008

TM 9-2350-261-20-2

REPLACE STOPLIGHT SWITCH AND BRACKET — Continued

0290 00

INSTALLATION

1.

Place switch (3) on bracket (6). Secure with two screws (9), four washers (8), and two new locknuts (7).

2.

Align bracket (6), with switch (3) attached, to driver’s compartment bulkhead. Secure with two washers (5) and

screws (4).

3.

Connect circuit 75B lead (2) and circuit 75A lead (1) to switch (3).

ADJUSTMENT

NOTE

If movement of switch is not enough to adjust switch, bend tab on steering levers to get correct

adjustment.

1.

Connect battery ground lead (WP 0294 00).

2.

Turn MASTER SWITCH to ON (see your -10).

0290 00-2