REPLACE REAR MAIN WIRING HARNESS (M113A2, M901A1, AND
M1059 ONLY ) — Continued
32. Install rear main wiring harness (1) on guard (2). Secure with two screws (3), nuts (4), and clamps (5).
33. Install guard (2) and ground strap (6) on hull. Secure with two screws (7) and new lockwashers (8).
34. Install wiring harness (1) on cradle (9). Secure with cradle clip (10).
35. Install wiring harness (1) on fuel tube (11). Secure with two new tie straps (12).
0289 00-17
0289 00
TM 9-2350-261-20-2