TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 515 of 1008

TM 9-2350-261-20-2

REPLACE BATTERY BOX INSULATION AND HEAT EXCHANGER (M113A2,

M901A1, AND M1059 ONLY) — Continued

0310 00

INSTALLATION

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

1.

Apply sealing compound on insulation sheets. Wait 10 to 20 seconds until sealing compound becomes tacky.

2.

If removed, install bottom insulation sheet (8), left insulation sheet (7), right insulation sheet (6), rear insulation sheet

(5), front insulation sheet (4), and insulation strip (3) in battery box (9).

3.

If removed, install insulation sheet (1) on battery box cover (2).

4.

Install two new grommets (10) in battery box (9).

5.

Install two clamps (11) on heat exchanger (12). Install heat exchanger in battery box (9).

6.

Install two hoses (13) on heat exchanger (12). Secure with two clamps (11).

031000-3