TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 511 of 1008

TM 9-2350-261-20-2

REPLACE BATTERY BOX INSULATION AND HEAT EXCHANGER (M577A2

AND M1068 ONLY) — Continued

0309 00

4.

Place two clamps (10) on heat exchanger (11). Install heat exchanger in battery box (6).

5.

Install two short hoses (12) on heat exchanger (11). Secure with two clamps(10)

.

6.

Place four clamps (13) on two elbows (14). Install elbows in hoses (12). Install hoses (15) on elbows. Secure all those

hoses with clamps (13).

FOLLOW-THROUGH STEPS

1.

Install batteries (WP 0302 00).

2.

Fill carrier cooling system (WP 0194 00).

3.

Fill coolant heater system (WP 0639 00).

4.

Start coolant heater (see your -10). Check for leaks.

5.

Raise and lock ramp (see your -10).

6.

Turn MASTER SWITCH to OFF (see your -10).

END OF TASK

0309 00-5/6 blank