TM 9-2350-261-20-2
REPLACE BATTERY DRAWER INSULATION AND HEAT
EXCHANGER (M1064 ONLY)
0308 00
THIS WORK PACKAGE COVERS:
Removal (page 0308 00-1).
Clean, Inspect, and Repair (page 0308 00-3).
Installation (page 0308 00-4).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Sealing compound (WP 0782 00, Item 66)
Sodium bicarbonate (WP 0782 00, Item 70)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
Batteries removed (WP 0303 00)
Carrier cooling system drained (WP 0193 00)
Coolant heater system drained (WP 0639 00)
REMOVAL
1.
Remove four nuts (1), washers (2), screws (3), and two brackets (4) from battery drawer (5).
2.
Loosen four clamps (6). Remove two hoses (7) from heat exchanger (8) and two elbows (9). Remove clamps from hoses.
030800-1