TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 491 of 1008

TM 9-2350-261-20-2

REPAIR BATTERY DRAWER (M1064 ONLY) — Continued

0306 00

CLEAN AND INSPECT

1.

Inspect slide assemblies. If the slide binds or has damaged stops, install a new slide.

2.

Clean drawer and parts by soaking in a solution of sodium bicarbonate and water. After foaming stops, flush with clean

water and dry with clean cloth.

3.

Inspect battery drawer for dents and cracks. If damaged beyond repair, install new drawer.

ASSEMBLY

1.

Apply epoxy coating to inside surface of battery drawer (5).

2.

If removed, install rubber bumpers (18) in battery drawer (5).

3.

If removed, place wear plate (17) on hull mount. Secure with screw (16) and new locknut (15).

4.

Install washer (13) and handle (12) in battery drawer (5). Insert key (14) in handle and install cam (11). Secure with

new locknut (10).

5.

Place channel divider (9) in battery drawer (5). Secure with two screws (8), washers (7), and new locknuts (6).

6.

Place plate (4) on side of drawer (5). Secure with three screws (3), washers (2), and new locknuts (1).

030600-3