TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 490 of 1008
REPAIR BATTERY DRAWER (M1064 ONLY) — Continued
2.
Remove eight locknuts (3), washers (4), screws (5), and battery drawer (6) from two angles (7). Discard locknuts.
3.
Extend two slide assemblies (8) to stops. Remove eight locknuts (9), washers (10), screws (11), and two angles (7) from
slide assemblies. Discard locknuts.
4.
Extend two slide assemblies (8) to stops. Remove 10 locknuts (12), washers (13), screws (14), and slide assemblies from
hull mounts. Discard locknuts.
5.
Remove three locknuts (1), washers (2), screws (3), and plate (4) from side of battery drawer (5). Discard locknuts.
6.
Remove two locknuts (6), washers (7), screws (8), and channel divider (9) from battery drawer (5). Discard locknuts.
7.
Remove locknut (10), cam (11), handle (12), and washer (13) from battery drawer (5). Remove key (14) from handle.
Discard locknut.
8.
If needed, remove locknut (15), screw (16), and wear plate (17) from hull mount.
9.
If needed, remove two rubber bumpers (18) from front of battery drawer (5).
0306 00-2
0306 00
TM 9-2350-261-20-2
Back to Top
