TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 486 of 1008
TM 9-2350-261-20-2
REPAIR BATTERY BOX — Continued
0305 00
1.
Remove four locknuts (1), washers (2), screws (3), and two latches (4) from side of battery box (5). Discard locknuts.
2.
Remove two screws (6), washers (7), and channel divider (8) from battery frame (9).
3.
Remove four screws (10), eight washers (11), and battery frame (9) from battery box (5). Remove four resilient mounts
(12) from frame.
4.
Remove three locknuts (13), washers (14), screws (15), grommets (16), and washers (17) from battery box (5). Discard
locknuts.
5.
If necessary, remove rubber bumpers (18) from battery box (5).
CLEAN AND INSPECT
1.
Inspect resilient mounts, bumpers, and grommets for cuts, cracks, tears, and loss of resilience. If parts are hard, brittle,
cut, cracked, or torn, install new parts.
2.
Clean battery box with brush dipped in mixture of sodium bicarbonate and water. After foaming stops, flush with clean
water and dry with clean cloth.
3.
Inspect battery box for dents and cracks. If damaged beyond repair, notify direct support maintenance.
4.
Inspect frame and divider channel for dents and cracks. If damaged beyond repair, install new part.
0305 00-2
Back to Top
