TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 478 of 1008

TM 9-2350-261-20-2

REPLACE BATTERIES AND RETAINERS (ALL EXCEPT M1064) — Continued

0302 00

CAUTION

Place batteries with positive (+) and negative (-) terminals as shown in diagram below. Damage

to components will occur if batteries are hooked up wrong.

1.

Place batteries (1) in battery box (2).

2.

Install two bolts (3) in slots of battery frame (4). Turn bolts to secure.

3.

Install two retainers (5) on two bolts (3). Secure with two washers (6) and nuts (7).

4.

Place clamp (8) on two retainers (5). Secure with washer (9) and bolt (10).

FOLLOW-THROUGH STEPS

1.

Install battery terminal lugs (WP 0300 00).

2.

Connect battery ground lead (WP 0294 00).

3.

Turn MASTER SWITCH to ON to check that batteries are installed correctly. Master switch on light should come

on (see your -10).

4.

Raise and lock ramp (see your -10).

5.

Stop/shutdown engine (see your -10).

END OF TASK

0302 00-4