TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 471 of 1008

TM 9-2350-261-20-2

REPLACE CIRCUIT 6 LEAD (ALL EXCEPT M577A2 AND M1068)

0301 00

THIS WORK PACKAGE COVERS:

Removal (page 0301 00-1).

Clean, Inspect, and Repair (page 0301 00-2).

Installation (page 0301 00-3).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

Battery Terminal Cleaner (WP 0780 00, Item 12)

Battery Terminal Puller (WP 0780 00, Item 47)

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Multimeter (WP 0780 00, Item 43)

Materials/Parts

Grommet (2)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Ramp lowered (see your -10)

Battery ground lead disconnected (WP 0294 00)

Battery box cover removed (WP 0295 00)

REMOVAL

WARNING

Gas from batteries can explode. Ventilate compartment before you disconnect or connect

battery cables. Battery acid can burn or blind you. Do not get acid on your skin or eyes.

ALWAYS disconnect ground lead (circuit 7) first and connect it last.

1.

Remove nut (1), circuit 6 lead (2), and screw (3) from terminal lug (4).

2.

Remove lead (2) and grommet (5) from battery box (6). Discard grommet.

030100-1