TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 465 of 1008

TM 9-2350-261-20-2

REMOVE/INSTALL BATTERY LEADS (M577A2 ONLY) — Continued

0299 00

INSTALLATION

CAUTION

Battery cells can be damaged if the battery is hooked up incorrectly. Make sure battery is

hooked up correctly.

1.

Install circuit 6 lead (1) and circuit 48B lead (2) as follows:

a.

Install terminal lug (5) on positive (+) battery post. Secure with screw (8) and nut (7).

b.

Install two new grommets (6) in battery box. Route circuit 6 lead (1) and 48B (2) through grommets into battery

box.

c.

Install screw (4), circuit 48B lead (2), and circuit 6 lead (1) on terminal lug (5) and secure with nut (3).

2.

Place terminal lug (1) on battery post. Secure with screw (2) and nut (3).

3.

Place jumper lead (4) on two screws (5) of two terminal lugs (1). Secure with two nuts (6).

4.

Install circuit 7 lead (7) as follows:

a.

Place lead (7) on hull mount. Secure with two washers (8), screw (9), and nut (10).

b.

Install new grommet (11) in battery box (12). Route lead (7) through grommet into battery box.

c.

Place lead (7) on screw (5) of terminal adapter (1) and secure with nut (6).

5.

Coat tops of four battery terminal lugs with grease.

029900-3