TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 460 of 1008

TM 9-2350-261-20-2

REMOVE/INSTALL BATTERY LEADS (M1068 ONLY) — Continued

0298 00

INSTALLATION

CAUTION

Battery cells can be damaged if battery is hooked up incorrectly. Make sure battery is hooked

up correctly.

1.

Install four battery terminals (1) and (2) in battery box (3). Secure with four screws (4) and nuts (5).

2.

Install circuit lead (6), circuit lead (7), circuit lead (8), and circuit lead (9) as follows:

a.

Install two new grommets (10) and (11) in battery box (3).

b.

Route circuit 6 lead (6), circuit 31 lead (7), and circuit 7 lead (8) through three-hole grommet (10) into battery

box (3).

c.

Route circuit 48B lead (9) through grommet (11) into battery box (3).

d.

Install circuit 48B lead (9), circuit 31 lead (7), and circuit 6 lead (6) on battery positive terminal (1). Secure with

screw (12) and nut (13).

e.

Install circuit 7 lead (8) on battery negative terminal (2). Secure with screw (12) and nut (13).

f.

Install circuit 7 lead (8) on hull mount. Secure with two washers (14), screw (15), and nut (16).

0298 00-4