TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 464 of 1008
TM 9-2350-261-20-2
REMOVE/INSTALL BATTERY LEADS (M577A2 ONLY) — Continued
0299 00
1.
Remove circuit 7 lead (1) as follows:
a.
Remove nut (2) and circuit 7 lead (1) from screw (3) on battery terminal lug (4).
b.
Remove nut (5), screw (6), two washers (7), and lead (1) from hull mount. Remove lead and grommet (8) from
battery box (9). Discard grommet.
2.
Remove two nuts (2) and jumper lead (10) from two screws (3) on two terminal lugs (4).
3.
Loosen nut (11) from screw (12) and remove terminal lug (4) from battery post. Use battery terminal puller.
4.
Remove circuit 6 lead (1) and circuit 48B lead (2) as follows:
a.
Remove nut (3), circuit 6 lead (1), screw (4), and circuit 48B lead (2) from battery terminal lug (5).
b.
Remove circuit lead 6 (1) and circuit lead 48B (2) and two grommets (6) from battery box. Discard grommets.
c.
Loosen nut (7) on screw (8) and remove terminal lug (5). Use battery terminal puller.
CLEAN, INSPECT, AND REPAIR
1.
Clean battery terminal lugs, battery posts, grounding bracket on hull, and lead connectorswithbrushdippedinmixture
of sodium bicarbonate and water. After foaming stops, flush parts with clean water. Dry with clean cloth.
2.
Clean battery terminals and posts with battery terminal cleaner.
3.
Check battery cover. Remove dents. Repair cracks. Replace cover damaged beyond repair.
4.
Check leads. Replace worn leads and damaged connectors (WP 0312 00).
0299 00-2
Back to Top
