TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 472 of 1008

TM 9-2350-261-20-2

REPLACE CIRCUIT 6 LEAD (ALL EXCEPT M577A2 AND M1068) — Continued

0301 00

3.

On M113A2 and M901A1 carriers, remove five clips (7) from cradles (8). Remove lead (2) from cradles.

4.

Remove five screws (9) and cradles (8) from hull weldnuts.

5.

Remove eight nuts (6), washers (7), screws (8), and master switch panel (9) from distribution box (10).

6.

Remove nut (11), lead (12), and screw (13) from master switch bus bar (14). Remove lead and grommet (15) from

panel (9). Discard grommet.

7.

Pull lead (12) from hull support channel. Remove lead from carrier.

CLEAN, INSPECT, AND REPAIR

WARNING

Battery posts and cables touched by metal objects can short circuit, and burn you. Do not

wear jewelry, necklaces, or watches when working on the electrical system. Keep tools away

from posts, wires, and terminals.

0301 00-2