TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 498 of 1008

TM 9-2350-261-20-2

REPLACE BATTERY TO RADIO HARNESS (M1059, M901A1, AND

M113A2 ONLY) — Continued

0307 00

INSTALLATION

1.

Tie rope (1), retained in transverse beam, to circuit 48 harness (2) at battery end.

2.

Pull rope (1) and harness (2) through the transverse beam until harness can be grasped at the right side of carrier.

3.

Pull harness (2) to the battery box on right side of carrier.

4.

Install two receptacles (1) on bracket (2). Secure with eight screws (3) and new locknuts (4).

5.

Install two ground leads (5), one capacitor (6), and circuit 48 harness (7) on weldnut (8). Secure with screw (9), two

new lockwashers (10), and one clamp (11).

0307 00-4