TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 505 of 1008

TM 9-2350-261-20-2

REPLACE BATTERY DRAWER INSULATION AND HEAT EXCHANGER

(M1064 ONLY) — Continued

0308 00

5.

Install battery drawer (WP 0306 00).

6.

Place two clamps (10) on two elbows (12). Install two hoses (13) on two elbows (12) and heat exchanger (11). Secure

with four clamps.

7.

Place two brackets (14) on battery drawer (3). Secure with four screws (15), washers (1), and nuts (2).

FOLLOW-THROUGH STEPS

1.

Install batteries (WP 0303 00).

2.

Fill carrier cooling system (WP 0194 00).

3.

Fill coolant heater system (WP 0639 00).

4.

Start coolant heater (see your -10). Check heat exchanger for leaks. Turn heater off.

5.

Raise and lock ramp (see your -10).

6.

Stop/shutdown engine (see your -10).

END OF TASK

0308 00-5/6 blank