TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 510 of 1008

TM 9-2350-261-20-2

REPLACE BATTERY BOX INSULATION AND HEAT EXCHANGER (M577A2

AND M1068 ONLY) — Continued

0309 00

INSTALLATION

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

1.

Apply adhesive to insulation sheets. Wait 10 to 20 seconds until adhesive becomes tacky.

2.

If removed, install bottom insulation sheet (5), left insulation sheet (4), right insulation sheet (3), rear insulation sheet

(2), and front insulation sheet (1) in battery box (6).

3.

If removed, install insulation sheet (7) on battery box cover (8).

0309 00-4