TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 709 of 1008

TM 9-2350-261-20-2

REPLACE T130 TRACK — Continued

0366 00

INSTALLATION

1.

(H): Lay track (1) out flat in front of carrier so that track guides are aligned between first pair of road wheels (3).

2.

Remove blocks used to keep carrier from moving (see your -10).

3.

Start engine (see your -10). Place range selector in 1 DRIVE. Slowly drive carrier forward (see your -10).

4.

(H): Pull track (1) up and over idler wheel (4), road wheels (3), and drive sprocket (2).

5.

Stop carrier when hub of first road wheel is directly over third track shoe from the end of the track.

6.

Place range selector in N. Stop engine (see your -10).

WARNING

Failure to lock steering levers and block the road wheels can allow the carrier to move and

could result in injury or death. Always lock steering levers and block road wheels before

working on the carrier.

7.

Block carrier (see your -10).

8.

Join track (see your -10). TORQUE TRACK PIN NUT TO 115-135 LB-FT (156-183 N·M). Use torque wrench.

9.

Adjust tension (see your -10).

FOLLOW-THROUGH STEPS

1.

Install track cover (WP 0365 00).

2.

Road test carrier to check that track is installed properly (WP 0120 00).

3.

Stop/shutdown engine (see your -10).

END OF TASK

0366 00-3/4 blank