TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 718 of 1008

TM 9-2350-261-20-2

REPLACE T150 TRACK SHOE ASSEMBLY — Continued

0369 00

INSTALLATION

NOTE

Position track shoes at a slight angle to mount end connectors on both pins.

1.

Install track shoe (1) on track. Have helper assist.

a.

Install two track pin alignment tools (4) over track shoe pins (5).

b.

Install four end connectors (2) on track shoe pins (5). Remove track pin alignment tool (4) before driving end

connectors flush with pin ends.

c.

Drive end connectors (2) flush with pin ends and install bolts (3) on each end connector.

2.

Join track (see your-10).

3.

TIGHTEN FOUR BOLTS (3) TO 400–430 LB-FT (543–583 N·M) TORQUE. Use torque wrench.

0369 00-2

FOLLOW-THROUGH STEPS

1.

Adjust track tension (see your -10).

2.

Unblock carrier (see your -10).

3.

Road test carrier to check that track is installed correctly (see your -10).

END OF TASK