TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 723 of 1008

TM 9-2350-261-20-2

REPLACE T130 ROAD WHEEL — Continued

0371 00

INSTALLATION

1.

Lift track assembly with bar. Place two road wheels (1) on road wheel arm (2). Secure loosely with eight washers

(3) and new locknuts (4).

2.

Remove blocks used to keep carrier from moving (see your -10).

WARNING

You can be hurt if road wheel lifter slips while road arm is being lowered. Stand clear.

3.

Start engine (see your -10). Place range selector in RANGE 1. Slowly drive carrier forward off lifter (5). Remove lifter.

WARNING

Failure to lock steering levers and block the road wheels can allow the carrier to move and

could result in injury or death. Always lock steering levers and block road wheels before

working on the carrier.

4.

Block carrier (see your -10).

FOLLOW-THROUGH STEPS

1.

Adjust track tension (see your -10).

2.

Road test carrier to check that road wheel is installed properly (WP 0120 00).

END OF TASK

0371 00-3/4 blank

5.

TIGHTEN EIGHT LOCKNUTS (4) TO 150-170 LB-FT (203-230 N·M) TORQUE. Use torque wrench.