TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 732 of 1008

TM 9-2350-261-20-2

REPLACE ROAD WHEEL HUB — Continued

0373 00

4.

Remove grease fitting (12) and relief valve (13) from hub (4).

5.

If damaged, remove bolt(s) (14) from hub (4). Discard bolt(s).

6.

If damaged, remove bearing cups (15) and (16) from hub (4). Discard cups.

CLEAN, INSPECT, AND REPLACE

1.

Check fittings and relief valve for wear and damage. Replace if needed.

2.

Inspect bearings. See TM 9-214. Replace if needed.

INSTALLATION

CAUTION

Bearings must be replaced as assemblies. Do not mix cups and bearings.

1.

If removed, install new bearing cups (1) and (2) in hub (3). Use replacer.

2.

If removed, install new bolts (4) in road wheel hub (3).

0373 00-2