TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 726 of 1008

TM 9-2350-261-20-2

REPLACE T150 ROAD WHEEL — Continued

0372 00

2.

Loosen eight locknuts (7) on road wheel (9). Do not remove nuts.

WARNING

Position retainer stops inside of end connectors to prevent the lifter from slipping off and

causing injury and/or death to personnel.

3.

Install retainer (4), two flat washers (3), screws (2) and T-nuts (1) on inside of track assembly.

4.

Place lifter (5) under road wheel arm (6). Keep lower tips of lifter in track link just rearward of wheel being removed.

5.

Unblock carrier (see your -10)).

WARNING

If road wheel lifter slips while lowering road arm, it could injure you. Stand clear before you

lower road arm.

6.

Start engine (see your -10). Place gear selector in R. Slowly back carrier until lifter (5) is vertical and road wheel (9)

clears ground.

WARNING

Failure to lock steering levers and block the road wheels can allow the carrier to move and

could result in injury or death. Always lock steering levers and block road wheels before

working on the carrier.

7.

Block carrier (see your -10).

0372 00-2