TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 731 of 1008

TM 9-2350-261-20-2

REPLACE ROAD WHEEL HUB

0373 00

THIS WORK PACKAGE COVERS:

Removal (page 0373 00-1).

Clean, Inspect, and Replace (page 0373 00-2).

Installation (page 0373 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Replacer (WP 0780 00, Item 57)

Ring Spacer (WP 0780 00, Item 71)

Torque Wrench (WP 0780 00, Item 103)

Materials/Parts

Grease (WP 0782 00, Item 24)

Sealing compound (WP 0782 00, Item 61)

Cotter pin

Hub cap gasket

Hub-to-arm seal

Inner bearing (as needed)

Inner bearing cup (as needed)

Materials/Parts

Outer bearing (as needed)

Outer bearing cup (as needed)

Ribbed shoulder bolt (as needed)

Personnel Required

Unit Mechanic

References

TM 9-214

W P 01 20 00

Equipment Condition

Carrier on level surface

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Road wheel removed (WP 0371 00) (T130) or

(WP 0372 00) (T150)

REMOVAL

1.

Remove four screws (1), hub cap (2), and gasket (3) from road wheel hub (4). Discard gasket.

2.

Remove cotter pin (5), nut (6), and washer (7) from road wheel support arm (8). Discard cotter pin.

3.

Remove outer bearing (9) and hub (4) from road wheel support arm (8). Remove seal (10) and inner bearing (11)

from hub (4). Discard seal.

037300-1