TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 728 of 1008

TM 9-2350-261-20-2

REPLACE T150 ROAD WHEEL — Continued

0372 00

INSTALLATION

1.

Lift track assembly with bar. Place two road wheels (1) on road wheel arm (2). Secure loosely with eight washers

(3) and new locknuts (4).

2.

Unblock carrier (see your -10).

WARNING

If road wheel lifter slips while lowering road arm, it could injure you. Stand clear before you

lower road arm.

3.

Start engine (see your -10). Place range selector in RANGE 1. Slowly drive carrier forward off lifter (5). Remove lifter.

WARNING

Failure to lock steering levers and block the road wheels can allow the carrier to move and

could result in injury or death. Always lock steering levers and block road wheels before

working on the carrier.

4.

Remove two T-nuts (6), screws (7), flat washers (8), and retainer (9) from lifter (5) and remove road wheel lifter

assembly from track.

5.

Block carrier (see your -10).

6.

TIGHTEN EIGHT NUTS (4) TO 150-170 LB-FT (203-230 N·M) TORQUE. Use torque wrench.

0372 00-4