TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 737 of 1008

TM 9-2350-261-20-2

REPLACE ROAD WHEEL SUPPORT ARM, BEARINGS, AND SEALS

0374 00

THIS WORK PACKAGE COVERS:

Removal (page 0374 00-1).

Clean, Inspect, and Replace (page 0374 00-3).

Installation (page 0374 00-3).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Replacer (WP 0780 00, Item 57)

Socket Wrench Set (WP 0780 00, Item 96)

Torque Wrench (WP 0780 00, Item 102)

Torque Wrench (WP 0780 00, Item 103)

Materials/Parts

Grease (WP 0782 00, Item 24)

Sealing compound (WP 0782 00, Item 61)

Bearing (2)

Inner seal

Key washer (3)

Outer seal

Packing

Retainer gasket

Personnel Required

Unit Mechanic

References

TM 9-214

Equipment Condition

Carrier on level surface

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Road wheel removed (WP 0371 00) (T130) or

(WP 0372 00) (T150)

Road wheel hub removed (WP 0371 00)

Shock absorber removed from first, second, or fifth road

wheel (WP 0379 00)

Torsion bar removed (WP 0385 00)

REMOVAL

1.

Remove six screws (1), road wheel arm assembly (2) (number one and two positions) and packing (3).

2.

Remove two screws (1), four screws (4), road wheel support arm assembly (2), packing (3), and guard (5) from hull

(number three position).

037400-1