TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 745 of 1008

TM 9-2350-261-20-2

REPLACE IDLER WHEEL ARM BEARINGS AND SEALS

0376 00

THIS WORK PACKAGE COVERS:

Removal (page 0376 00-1).

Clean, Inspect, and Replace (page 0376 00-2).

Installation (page 0376 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Replacer (WP 0780 00, Item 57)

Spacer Ring (WP 0780 00, Item 71)

Torque Wrench (WP 0780 00, Item 103)

Materials/Parts

Sealing compound (WP 0782 00, Item 60)

Bolt, as needed

Cotter pin

Gasket

Key washer

Seal

Personnel Required

Unit Mechanic

References

TM 9-214

W P 01 20 00

Equipment Condition

Carrier on level surface

Engine stopped (see your -10)

Carrier blocked (see your -10)

Track disconnected (see your -10)

Idler wheel removed (WP 0375 00)

REMOVAL

1.

Remove four screws (1), hub cap (2), and gasket (3) from idler wheel hub (4). Discard gasket.

2.

Remove cotter pin (5), nut (6), key washer (7), and hub (4) from idler wheel arm (8). Discard cotter pin and key washer.

037600-1