TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 749 of 1008

TM 9-2350-261-20-2

REPLACE IDLER WHEEL ARM BEARINGS AND SEALS — Continued

0376 00

10. Install new cotter pin (6) in arm (7).

11. Install new gasket (8), hub cap (9), and four screws (10) in hub (1).

12. Fill hub (1) with grease (WP 0120 00).

FOLLOW-THROUGH STEPS

1.

Install idler wheel (WP 0375 00).

2.

Connect track and adjust tension (see your -10).

3.

Road test carrier to check that idler wheel hub is installed right (WP 0120 00).

END OF TASK

0376 00-5/6 blank