TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 755 of 1008

TM 9-2350-261-20-2

REPLACE TRACK TENSION ADJUSTER AND MOUNT

0378 00

THIS WORK PACKAGE COVERS:

Removal (page 0378 00-1).

Clean, Inspect, and Replace (page 0378 00-2).

Installation (page 0378 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Torque wrench adapter (WP 0780 00, Item 7)

Torque wrench (WP 0780 00, Item 103)

Personnel Required

Unit Mechanic

Equipment Condition

Carrier on level surface

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Track disconnected (see your -10)

REMOVAL

1.

Remove screw (1) and washer (2) from mount (3).

2.

Remove screw (4) and washer (5) from shaft on idler arm.

3.

Remove two screws (6) from mount (3). Loosen screw (7). Rotate mount and remove screw.

4.

Pull track adjuster (8) down. Remove mount (3) from adjuster.

5.

Remove adjuster (8) from shaft on idler arm.

6.

Remove grease fitting (9) and relief valve (10) from adjuster (8).

037800-1