TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2

  TM-9-2350-261-20-2 - Page 764 of 1008

TM 9-2350-261-20-2
REPLACE SHOCK ABSORBER PIN — Continued
0380 00
INSTALLATION
1.
Install pin (2) in road wheel support arm (3). Secure with new locknut (1). TIGHTEN LOCKNUT TO 210-230 LB-FT
(283-310 N·M). Use torque wrench.
FOLLOW-THROUGH STEPS
1.
Install road wheel support arm (WP 0374 00).
2.
Install road wheel (WP 0371 00).
3.
Road test carrier to check that shock absorber pin is installed properly (WP 0120 00).
END OF TASK
0380 00-2


Back to Top