TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 767 of 1008

TM 9-2350-261-20-2

REPLACE T130 SPROCKET WHEEL ASSEMBLY

0382 00

THIS WORK PACKAGE COVERS:

Removal (page 0382 00-1).

Clean, Inspect, and Replace (page 0382 00-2).

Installation (page 0382 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Socket Wrench Set (WP 0780 00, Item 97)

Torque Wrench (WP 0780 00, Item 105)

Materials/Parts

Lock bolts (20)

Lock bolts (10)

Personnel Required

Unit Mechanic

References

TM 9-2350-261-24P

Equipment Condition

Carrier on level surface

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Track cover removed (WP 0365 00)

Track disconnected (see your -10)

REMOVAL

NOTE

The following maintenance procedure applies to one sprocket wheel assembly only.

You will have one or two sprocket wheel assembly configurations. The oldest configuration uses

a shorter bolt. Refer to TM 9-2350-261-24P for proper replacement part numbers.

1.

Remove track from sprocket wheel assembly (2).

2.

Remove ten lock bolts (7) and sprocket wheel assembly (2) from carrier. Discard lock bolts.

3.

Remove 20 lock bolts (3) and two sprockets (4) from sprocket wheel (5). Discard lock bolts.

4.

Remove two rubber cushions (6) from sprocket wheel (5).

038200-1