TM 9-2350-261-20-2
REPLACE T130 SPROCKET WHEEL ASSEMBLY — Continued
0382 00
FOLLOW-THROUGH STEPS
1.
Connect track and adjust tension (see your -10).
2.
Install track cover (WP 0365 00).
3.
Road test carrier to check that sprocket wheel assembly is installed properly (WP 0120 00).
4.
After road test, check rotation of cushion with respect to sprockets. Measure from the outer edge of the cushion. Replace
cushion that rotates beyond 1 1/2 inches (4 cm) of initial position.
END OF TASK
0382 00-3/4 blank