TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 777 of 1008

TM 9-2350-261-20-2

REPAIR T150 SPROCKET WHEEL AND TRACK ASSEMBLIES — Continued

0384 00

4.

Place sprocket wheel assembly (2) on final drive (1). Secure with ten new self-locking screws (3). Have helper assist.

5.

TIGHTEN TEN SCREWS (3) TO 170–190 LB-FT (231–258 N·M) TORQUE. Use torque wrench (WP 0780 00, Item

105).

FOLLOW-THROUGH STEPS

1.

Install track on drive sprockets (WP 0367 00).

2.

Join track (see your

-10).

3 .

TIGH TEN T W O EN D C ON NECT

OR BO LT S ( 9) TO 4 00– 430 LB-FT

TO R QUE. Use torque wrench

(WP 0780 00, Item 105).

4.

Adjust track tension (see your -10).

5.

Install track cover (WP 0365 00).

END OF TASK

0384 00-3/4 blank

(543–583 N·M)

6.

Road test carrier to check that drive sprocket and cushion are installed correctly (see your -10).