TM 9-2350-261-20-2
REPLACE T130 TRACK SHOE AND PAD ASSEMBLY — Continued
0368 00
REMOVAL
1.
Remove locknut (3) and pad (4) from track shoe (5). Discard locknut.
INSTALLATION
NOTE
Your carrier might have either T130 or T130E1 track, or a mixture of both. A T130E1 track
pad is about 4-3/4 inches (12 cm) long. A T130 track pad is about 5-3/4 inches (14.6 cm) long.
1.
Install track shoe pad (4) in track shoe (5). Secure with new locknut (3). TIGHTEN LOCKNUT TO 135-155 LB-FT
(183-210 N·M) TORQUE. Use torque wrench.
END OF TASK
0368 00-2