TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 713 of 1008

TM 9-2350-261-20-2

REPLACE T150 TRACK — Continued

0367 00

5.

Repeat step 4 until a complete track has been connected in a line.

WARNING

Failure to lock steering levers and block the road wheels can allow the carrier to move and

could result in injury or death. Always lock steering levers and block road wheels before

working on the carrier.

9.

Join track (see your -10).

10. TIGHTEN ALL END CONNECTOR BOLTS (3) TO 400–430 LB-FT (543–583 N·M) TORQUE. Use torque wrench.

11. Adjust track tension (see your -10).

FOLLOW-THROUGH STEPS

1.

Install track cover (WP 0365 00)

2.

Unblock carrier (see your -10).

3.

Road test carrier to check that track is installed correctly (see your -10).

END OF TASK

0367 00-3/4 blank

6.

Unblock carrier (see your -10).

7.

(H): Drive carrier backward until track (4) positions on sprockets (5).

8.

(H): Drive carrier backward until track (4) is over idler wheels (6).