TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

  TM-9-2350-261-20-3 - Page 237 of 932

TM 9-2350-261-20-3
REPLACE DRIVER’S SEAT (ALL CONFIGURATIONS)
0478 00
THIS WORK PACKAGE COVERS:
Removal (page 0478 00-1).
Installation (page 0478 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Locknut (2)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
REMOVAL
1.
Push driver’s seat back assembly (1) forward against spring tension of flanges (2) and lift seat back assembly from
seat (3).
2.
On old configuration seats, remove two screws (4), locknuts (5), and seat lock rack (6) from seat mounting plate (7).
Discard locknuts.
3.
Slide seat (3) forward. Remove four screws (8) from seat mounting plate (7) and seat impact absorber (9) (on new
configuration seats) or post assembly (10) (on old configuration seats). Remove plate (7).
4.
On old configuration seats, remove four screws (11) from seat impact absorber (9) and post assembly (10). Remove
absorber.
047800-1


Back to Top