TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 238 of 932
TM 9-2350-261-20-3
REPLACE DRIVER’S SEAT (ALL CONFIGURATIONS) — Continued
0478 00
INSTALLATION
1.
Slide plate (1) into seat (2).
2.
On old configuration seats, position plate (1) with seat on post assembly (3). Secure with four screws (4).
3.
On new configuration seats, install absorber (5) on post assembly (6). Secure with four screws (7).
4.
Position plate (1) on absorber (5). Secure with four screws (4).
5.
Position seat rails (8) with mounting plate (1). Slide seat (2) to the rear.
6.
Install seat lock rack (9) on seat mounting plate (1). Secure with two screws (10) and new locknuts (11).
7.
Push seat back assembly (12) down into seat (2) until it locks into position.
FOLLOW-THROUGH STEPS
1.
Raise andlockramp(seeyour-10)
.
2.
Stop engine(seeyour-10)
.
END OF TASK
0478 00-2
Back to Top
