TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 258 of 932

TM 9-2350-261-20-3

REPLACE/REPAIR DRIVER’S SEAT POST ASSEMBLY — Continued

0483 00

INSTALLATION

1.

Place post assembly (1) on lower bracket (2) and against sponson bracket (3). Secure post to sponson bracket with

two screws (4), washers (5), and strip (6).

2.

Secure lower end of post assembly (1) to lower bracket (2) with two screws (7) and new locknuts (8).

3.

Install bumper (9) inside post (1).

FOLLOW-THROUGH STEPS

1.

Install driver’s seat impact absorber (WP 0478 00).

2.

Install driver’s seat assembly (WP 0478 00).

END OF TASK

0483 00-8