TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 323 of 932

TM 9-2350-261-20-3

REPLACE PERSONNEL SEATS, BACKREST, CUSHIONS, AND STRAPS

(M1064 ONLY) — Continued

0497 00

INSTALLATION

1.

If removed, install strap (20) on backrest (4). Secure with washer (19) and new rivet (18).

2.

Place cushion (17) on seat (8). Secure with two straps (16).

3.

Place two seatbelts (15) on seat (8). Secure with four screws (14), washers (13), and new locknuts (12).

4.

Align two legs (11) with seat (8). Secure with two straight pins (10) and four new cotter pins (9).

5.

Align seat (8) with sponson brackets. Secure with two straight pins (7), four washers (6), and four new cotter pins (5).

6.

Align backrest (4) with sponson lugs. Secure with two headed pins (3), washers (2), and two new cotter pins (1).

FOLLOW-THROUGH STEPS

1.

Raise and lock ramp (see your -10).

2.

Stop engine (see your -10).

END OF TASK

0497 00-3/4 blank