TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 329 of 932

TM 9-2350-261-20-3

REPLACE BLACKOUT CURTAIN AND FRAME (M577A2 AND M1068 ONLY) — Continued

0499 00

INSTALLATION

1.

If removed, place two eyelets (1) on curtain (2). Secure with two washers (3).

2.

If removed, place four buttons (4) on curtain (2). Secure with four sockets (5).

3.

Install two studs (6) on lower frame and traverse beam in driver’s compartment.

4.

If removed, install two fasteners (7) on rear bulkhead in driver’s compartment.

5.

Install new grommet (15), screw (14), two washers (13), and new locknut (12) on frame (11).

6 .

Align f ram e (11 ) with bulkhead an d spon so n. Secure with six screws (10),

12

washers ( 9), and six new locknuts

(

8

049900-3