TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 333 of 932

TM 9-2350-261-20-3

REPLACE RIGHT REARWARD TABLE (M577A2 ONLY) — Continued

0500 00

INSTALLATION

1.

Install four bumpers (1) in braces (2).

2.

Install four braces (2) on supports (3), (4), (5), and (6). Secure with 12 screws (7), washers (8), and new locknuts (9).

3.

Install four supports (3), (4), (5), and (6) and hinges (10) on table top (11). Secure with eight spacers (12) and 16

screws (13).

NOTE

Shims might be required to obtain clearance between screw and support bracket. (Use flat

washers as shims, two maximum.)

4.

Install table top with supports on hull. Secure with two screws (14), washers (15), and new locknuts (16).

5.

Install three screws (17) through table top and brackets on hull. Secure with three washers (18) and nuts (19).

6.

Install four catches (20) on two drop leaves (21) Secure with eight new lockwashers (22) and screws (23).

7.

Install two drop leaves (21) on hinges (10) Secure with eight spacers (24) and 16 screws (25).

FOLLOW-THROUGH STEPS

1.

Raise and lock ramp (see your -10).

2.

Stop engine (see your -10).

END OF TASK

0500 00-3/4 blank