TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 332 of 932

TM 9-2350-261-20-3

REPLACE RIGHT REARWARD TABLE (M577A2 ONLY) — Continued

0500 00

REMOVAL

1.

Remove 16 screws (1), eight spacers (2), and two drop leaves (3) from table top (4).

2.

Remove eight screws (5), lockwashers (6), and four catches (7) from two drop leaves (3). Discard lockwashers.

3.

Remove three nuts (8), washers (9), and screws (10) that hold table top (4) to hull.

NOTE

Shims might be required to obtain clearance between screw and support bracket. (Use flat

washers as shims, two maximum.)

4.

Remove two locknuts (11), washers (12), and screws (13) that hold table supports (14), (15), (16), and (17) to hull.

Discard locknuts.

5.

Remove 16 screws (18), eight spacers (19), hinges (20), and supports (14), (15), (16), and (17) from table top (4).

6.

Remove 12 locknuts (21), washers (22), screws (23), and four braces (24) from supports (14), (15), (16), and (17).

Discard locknuts.

7.

Remove four bumpers (25) from braces (24).

0500 00-2