TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 349 of 932

TM 9-2350-261-20-3

REPLACETENTANDFRAMEMOUNTS(M577A2ONLY)

050500

THIS WORK PACKAGE COVERS:

Removal (page 0505 00-1).

Installation (page 0505 00-3).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Torque wrench (WP 0780 00, Item 104)

Materials/Parts

Cotter pin (2)

Locknut (2)

Locknut (2)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Ramp lowered (see your -10)

Tent frame removed from carrier (see your -10)

REMOVAL

1.

Remove two locknuts (1), eight washers (2), two screws (3), and two end fittings (4) from rear bulkhead lugs. Discard

locknuts.

2.

Remove four screws (5), washers (6), and two brackets (7) from rear bulkhead.

3.

Remove two locknuts (8), washers (9), screws (10), and retainers (11) from brackets (7). Discard locknuts.

4.

Remove two cotter pins (12), nuts (13), washers (14), hand screws (15), and clamps (16) from brackets (7). Discard

cotter pins.

050500-1