TM 9-2350-261-20-3
REPLACE TENT AND CLAMPS (M577A2 ONLY)
0504 00
THIS WORK PACKAGE COVERS:
Removal (page 0504 00-1).
Installation (page 0504 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Spring pin (6)
Personnel Required
Unit Mechanic
Helper (H)
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
REMOVAL
1.
Release four straps (1). Remove tent (2) and straps from hull top plate. Have helper assist.
2.
Remove nine screws (3), washers (4), retainer strip (5), and rubber strip (6) from hull top plate.
3.
Remove two screws (7), washers (8), and spacers (9) from rear bulkhead.
4.
Remove six spring pins (10), wing nuts (11), washers (12), and two retainer strips (13) from rear bulkhead. Discard
spring pins.
050400-1