TM 9-2350-261-20-3
REPLACE VERTICAL AMMUNITION RACK (M1064 ONLY) — Continued
0506 00
INSTALLATION
1.
If straps (1), (2), and (3) were removed, replace with new straps.
2.
If decals (4) and (5) were removed, clean area and apply new decal.
3.
Install rack (6), 11 washers (7), and screws (8) on side hull and sponson.
4.
Install rack (9), 12 washers (10), and screws (11) on side hull and top plate.
FOLLOW-THROUGH STEPS
1.
Raise and lock ramp (see your -10).
2.
Unblock carrier (see your -10).
3.
Stop engine (see your -10).
END OF TASK
0506 00-3/4 blank