TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 364 of 932

TM 9-2350-261-20-3

REPAIR HORIZONTAL AMMUNITION RACK (M1064 ONLY) — Continued

0508 00

CLEANING

1.

Clean all parts of stowage rack.

INSPECTION AND REPAIR

1.

Inspect all metal parts for cracks, bends, or breaks. Repair minor defects. Replace parts that cannot be repaired.

2.

Inspect webbing straps and door hooks for excessive wear, cuts, or fraying. Replace defective parts.

ASSEMBLY

NOTE

Assemble each horizontal stowage rack without shims and straps outside the carrier. Do not

tighten any mounting screws until after installation in the carrier.

1.

Install two mortar wear bars (1) and (2) on lower stowage rack (3) with four washers (4), screws (14), and new locknuts

(15).

2.

Install upper stowage rack (6) on vertical posts (7) and (8) with two washers (9) and screws (10).

3.

Install lower stowage rack (3) on vertical posts (7) and (8) with two washers (9) and screws (10).

4.

Install four middle stowage racks (5) on vertical posts (7) and (8) with 16 washers (9) and screws (10).

5.

Install five doors (11) and (12) on five stowage racks (3) and (5) with five hinge pins (13).

0508 00-4