TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 426 of 932

TM 9-2350-261-20-3

REPLACE RIGHT SIDE RACK BASE (M1068 ONLY) — Continued

0531 00

REMOVAL

1.

Remove four screws (1) and bumper (2) from base extension (3).

2.

Remove three screws (1) and bumper (2) from base (4).

3.

Loosen nut (5) and lockwasher (6) from bolt (7) securing base extension (3). Raise base extension (3) and position

on base (4). Discard lockwasher.

4.

Remove 12 screws (8) and hinge (9) from base extension (3) and base (4).

5.

Remove locknut (10), screw (11), two washers (12), and bolt (7) from base extension mount (13). Discard locknut.

6.

Remove four screws (14), washers (15), and base extension mount (13) from right sponson.

7.

Remove two locknuts (16), screws (17), and four washers (18) from base (4) and sponson. Discard locknuts.

8.

Remove three screws (19), washers (20), and base (4) from bulkhead mounts.

0531 00-2