TM 9-2350-261-20-3
REPLACE LEFT BULKHEAD RADIO STOWAGE RACKS (M577A2 AND
M1068 ONLY) — Continued
0533 00
INSTALLATION
1.
Align three intercom brackets (1) with rack (2). Secure with six screws (3) and new locknuts (4).
2.
Align racks (5) and (2) with front and rear bulkhead lugs. Secure with two screws (6), four new lockwashers (7), and
two new locknuts (8) on each rack.
3.
Align racks (5) and (2) to left bulkhead lugs. Secure with screw (9), washer(s) (10) (to shim), two new lockwashers (11),
and new locknut (12) on each rack.
4.
Align racks (5) and (2) with left bulkhead lug. Secure with screw (13), two new lockwashers (14), and new locknut (15).
5.
Align hanger (16) with hull top plate lug. Secure with screw (17), two new lockwashers (18), and new locknut (19).
6.
Align hanger (16) with rear rack (2) and front rack (5). Secure with screw (20), two new lockwashers (21), and new
locknut (22).
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Raise and lock ramp (see your -10).
3.
Stop engine (see your -10).
END OF TASK
0533 00-3/4 blank