TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 442 of 932

TM 9-2350-261-20-3

REPLACE/REPAIR MAP BOARD (M1068 ONLY) — Continued

0535 00

INSTALLATION

1.

Install two brackets (1), new locknuts (2), washers (3), and six screws (4) on map board (5).

2.

Install frame (6) and 12 screws (7) on map board (5).

3.

Install 14 screws (7) in sides of frame (6).

4.

Install hinge (8), new locknuts (9), eight washers (10), and four screws (11) on frame (6).

5.

Install two stakes (12) in brackets (1).

6.

Install two tips (13) on stakes (12).

7.

Install strap (17) securing map board (14) to stowed position.

8.

Align map board assembly (14) with right side bulkhead mounts. Secure with two screws (15) and washers (16).

FOLLOW-THROUGH STEPS

1.

Start engine (see your -10).

2.

Raise and lock ramp (see your -10).

3.

Stop engine (see your -10).

END OF TASK

0535 00-2