TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 438 of 932

TM 9-2350-261-20-3

REPLACE MAP BOARD (M577A2 ONLY) — Continued

0534 00

REMOVAL

1.

Loosen two bolts (1) and clamps (2). Remove map board (3) from right bulkhead mounts.

2.

Remove two cotter pins (4), bolts (1), clamps (2), spacers (5), and washers (6) from bulkhead stops. Discard cotter pins.

3.

Remove two springs (7) from four brackets (8).

4.

Remove four screws (9) and brackets (8) from map board (3).

5.

Open one end of four hooks (10). Remove hooks from four chains (11).

6.

Open both ends of four hooks (12). Remove hooks from four chains (11) and D-rings (13).

7.

Remove eight locknuts (14), screws (15), four hangers (16), and D-rings (13) from map board (3). Discard locknuts.

0534 00-2